Standard Features - Donahue Stock Trailers

Home | Product Lines | Site Map | Location | Contact Us

Compare Standard Features
Found on a Donahue Stock Trailer

DEPENDABLE
Trailers have been field tested on Donahue’s ranch operation and continue to be tested and used under actual conditions.

JIG BUILT
All trailers are built in jigs to insure you a quality product and have been built continuously since 1976..

FRAME & FENDER
One piece formed 1/8" steel (10 ga.) frame and fender eliminates interior wheel wells early rust out and provides a fender to walk on to inspect livestock as well as hauling portable panels on each side.

SIDE WALLS
Smooth exterior 1/16, (16 ga.) galvannealed steel side walls attach to the 10 ga. frame 18" above floor makes a 52" tall solid side wall. Corrosion resistant galvannealed sheet metal is used in the highly corrosive areas, including side walls, top and gates, which adds extra protection against rust and provides excellent paintability.

INSIDE WIDTH & HEIGHT
Full 7' inside width, 6'9" height for larger livestock & horses, standard.

NOSE & TOP
Aerodynamic styling reduces wind drag.

GATE
Slam latches are standard on both the center and rear gate. Sliding gate standard in rear optional for center gate.

AXLES
Rubber torsion axles with 12" x 2" brakes, E-Z lube spindles. Wheel alignment is checked on all trailers.

GOOSENECK
64" tall neck for added clearance on the new taller trucks and 4-wheel drives. Constructed of 7" channel with 3/8 x 4 1/2 and 3/8 x 7 gussets.

TIRES
Radials standard ST235/80R 16 LR E

COUPLER
4" Dia. heavy duty adjustable coupler stem with 2 5/16" Coupler.

JACK STAND
12,000# Jack with Drop Leg for easier adjustment.

LIGHTS & WIRING
Flush mount LED tail lights are mounted high for good visibility. LED Identification light & Clearance lights standard. All wiring is overhead and in conduit.

TIE RINGS
Rear of trailer has 4-tie rings that portable panels can be attached to and still close rear gate.

FLOORING
2" southern yellow pine runs length of trailer.

Click on your browser's back button to return to the previous page.

Manufacturers Notice: Because of efforts to constantly improve our products, all specifications, equipment and prices are subject to change without notice. The Donahue Corporation reserves the right to improve models without incorporating these changes in similar models produced at an earlier date.

Home | Product Lines | Site Map | Location | Contact Us

The Donahue Corporation Logo
The Donahue Corporation
P.O. Box 126
Durham, Kansas 67438
Phone - (620) 732-2665
1-800-457-7406
Email - info@donahuetrailers.com