Stock Trailer Package

Standard Features:
Full 7 ft. inside width. No interior fender wells. 1/8" steel on lower 18" of side wall. 52" high side walls Full length escape gate. 2 5/16" coupler, 4" pipe, adj. height. Breakaway switch w/battery box. 12,000 lb. drop leg jack stand. Rubber torsion axles, 8-bolt hubs. Electric brakes on both axles.	2 1/2" x 1 3/4" rubber rollers on sliding gate. Double slam latch with safety latch on rear door. Tie rings at rear of trailer. LED clearance, stop & turn lights. Wiring is overhead and in conduit. Thoroughly cleaned and primed. Deluxe color coded trim & side molding. 1/8" aluminum rock guards. 2" southern yellow pine flooring. 6' 9" inside height ST235/80R 16 LR E 10-ply radials

Optional Equipment:
Extra center gate. Sliding Center gate. Two front air vents w/covers. Dome light w/switch. Spare tire and wheel.

Lengths Available:
12ft., 16ft., 18ft., 20ft., 24ft., 28ft., and 32ft.

Donahue exceeds industry standards with GALVANNEALED sheet metal used in highly corrosive areas. The lower 18" of side wall is formed from 1/8" steel, the upper 34" is 1/16" Galvannealed, equals 52". Competition uses 1/16" the full height. Slam latches are provided on the center and rear gate. Rear gate is secured closed with a safety latch. A full 7 ft. inside width with no fender wells and smooth exterior sides gives you the finest trailer on the market today.

Manufacturers Notice: Because of efforts to constantly improve our products, all specifications, equipment and prices are subject to change without notice. The Donahue Corporation reserves the right to improve models without incorporating these changes in similar models produced at an earlier date.

The Donahue Corporation
P.O. Box 126
Durham, Kansas 67438
Phone - (620) 732-2665
1-800-457-7406
Email - info@donahuetrailers.com

For further information contact Jim Donahue.
Web design and maintenance by