12 ft. Horse Trailer Package

Standard Features on Model SS-712-4N
Two front air vents w/covers. Plastic side windows. Dome light switch. Solid rear door. Full 7 ft. inside width. No interior fender wells. 1/8" steel on lower 18" of side wall. 52" high side walls Full length escape gate. 2 5/16" coupler, 4’ pipe, adj. height. Breakaway switch w/battery box. 12,000 lb. drop leg jack stand.	Electric brakes on both axles. Rubber torsion axles, 5-bolt hubs. Double slam latch with safety latch on rear door. Tie rings at rear of trailer. LED clearance, stop & turn lights. Wiring is overhead and in conduit. Thoroughly cleaned and primed. Deluxe color coded trim & side molding. 1/8" aluminum rock guards. 2" southern yellow pine flooring. 6' 9" inside height.

Optional Equipment:
Spare tire and wheel.

Lengths Available: 12 ft.

Donahue exceeds industry standards with GALVANNEALED sheet metal used in highly corrosive areas. The lower 18" of side wall is formed from 1/8" steel, the upper 34" is 1/16" Galvannealed, equals 52". Competition uses 1/16" the full height. Slam latches are provided on the center and rear gate. Rear gate is secured closed with a safety latch. A full 7 ft. inside width with no fender wells and smooth exterior sides gives you the finest trailer on the market today.

Manufacturers Notice: Because of efforts to constantly improve our products, all specifications, equipment and prices are subject to change without notice. The Donahue Corporation reserves the right to improve models without incorporating these changes in similar models produced at an earlier date.

The Donahue Corporation
P.O. Box 126
Durham, Kansas 67438
Phone - (620) 732-2665
1-800-457-7406
Email - info@donahuetrailers.com

For further information contact Jim Donahue.
Web design and maintenance by